2CV STEERING

STEERING COLUMN

2CV steering column accessories and locks. Online sales of accessories for the steering column of the Citroën 2CV: steering wheel, locking ring, steering columns dust covers, steering column sleeves, clips... You'll also find our steering column locks with complementary accessories: key, steering lock U clamp, anti-theft ingnition lock rubber cover, etc. For the steering column of your Citroën 2CV, choose an Expert!

STEERING RACK

Change the steering rack on your 2CV In our catalogue, you'll find steering racks and the various parts needed to fix them in place and keep them running smoothly. We offer steering levers or ball joints (right and left), pinions, tie-rod ends, slides, push rods, sleeves and other spare parts for 2CV steering racks.

STEERING AXIS

Don't take any risks! Maintain the steering pivot for optimum stability of your 2CV. Find all the parts for your Citroën's steering pivot: the original king pin, king pin plugs, steering rack guide rings,dust covers, king pin washers, etc.

STEERING WHEEL

The 2CV Mehari Club Cassis offers a wide range of 2CV steering wheels in bakelite or wood, as well as various accessories: gear knobs, adaptor hubs, steering wheel covers to personalise your interior and make your vehicle truly unique.

The evolution of 2CV steering wheels

When production of the 2CV A began on 11 July 1949, it was equipped with a steering wheel/steering column assembly forming a single black-painted metal part. The steering wheel had two spokes, an external diameter of 42 cm and drove the rack and sterring axis via a seven-tooth control pinion. The steering column part is attached to the bottom of the dashboard by a U-shaped flat sheet metal collar via a fixed tube.
In September 1960, the black colour was replaced by the famous Gris Rosé AC 136. The 2CV vans, whose steering wheel/column assembly had adopted the Gris Clair AC 132 in August 1954, also switched to Gris Rosé at this time.
The arrival of the 2CV AZAM in 1963 marked the first appearance of a removable steering wheel on the 2CV. The colour of the steering wheel also changed over the years and between versions. In February 1970, Citroën relaunched the 2CV and replaced the 2CV AZLP, with a 425cc engine, with two new models, the 2CV 4, with a 435cc engine, and the 2CV 6, with a 602cc engine. For these new saloons, Citroën chose to use the same dashboard as the 2CV AZAM Export of 1967, with a few minor differences. The only difference was that the manufacturer opted for a blue-grey Quillery bakelite steering wheel instead of the black one used on the AZAM. This colour was later replaced by various colour changes over the years and the limited series that accompanied the 2CV until the end of its production in 1990.

A wide choice of 2CV steering wheels in stock in various materials, colours and sizes

To meet the different models of the 2CV history, you will find in our online shop a complete range of spare parts dedicated to the steering of these mythical Citroën cars. And in particular a wide selection of steering wheels to adapt to the style you wish to give to your old car. With rivets, single arm, double arm or triple arm, these steering wheels for 2CV also equip the Mehari and Citroen Dyane.
For a sporty personalisation, the 602 range, specially designed to offer parts combining performance and premium quality, is enhanced by wooden steering wheels with a vintage look, available in 38 cm and 35 cm diameter for immediate purchase. For those who wish to respect historical models, our MCC range, made up of parts manufactured in accordance with Citroën standards, offers you the emblematic black 2-spoke steering wheel with a double chevron central hubcap, diameter 39 cm. Made of plastic, it is reinforced with steel for greater strength and durability. It is also available in black or brown leather for a more exclusive, high-end look. Finally, the single-spoke steering wheel in black or brown is one of the best-sellers in our range.
Whatever your choice of steering wheel model, an adaptor hub will allow it to be mounted on any other type of vehicle.

Additional accessories for 2CV steering wheels

This section also offers you a number of steering wheel covers which allow you to change the look of the steering wheel thanks to a wide range of plain (blue, grey, white, black) and two-tone (white/black, white/green, white/blue) colours. Supplied with a thread and a needle, they are to be sewn directly onto the steering wheel. Available in diameter 43 cm or 49 cm, they are suitable and easily adaptable to all generations of 2CV and Mehari Dyane.
Various models of round or extended gear knobs are available on this page, in several materials (bakelite, wood, leather or aluminium) and several finishes (black, grey, with chrome trim).
If you wish to fully customise your car's interior, we also offer steering wheel, knob and handbrake handle sets in black or brown leather of exceptional quality.
To change these parts in just a few minutes, we invite you to watch our technical video.